request_assistance_hero2

I-Shift PTO Pump Speed Calculator

Determine PTO / pump speed, calculate engine speed, hydraulic piston and gear pump specifications, pump part numbers, fitting dimensions, PTO part numbers and specifications, REPTO information, and more.

R80 PTO Speed Calc

Other PTO calculations

Determine PTO output HP at required speed, PTO torque calculation, Engine Speed Requirements, Pump Bending Moment, and more.

Misc PTO Calculations

Diagnostics

Volvo offers excellent software tools to assist customers, service technicians and bodybuilders in performing their own diagnostic work on Volvo trucks and components.

Diagnostics

Custom Solutions For Your Needs

Volvo has and will develop unique solutions to meet customers’ needs, including adapting supplied frame drilling layouts to our hole-grid strategy. The existing solutions include, but are not limited to those in the attached PDF. For requests or quotations, Volvo dealers can call 800-832-5929 or e-mail gerald.saunders@volvo.com. For body builders or customers, please contact your local Volvo dealer to begin this process.

Volvo-Customer-Solutions
Volvo Trucks

Request Assistance

Request

Request Custom Drawing

To request a PDF drawing or CAD file, please contact your dealer.

Find a Dealer

News & Events

See all News & Events
VECU5-Volvo-Module

1/15/2021

VECU5 NEW VOLVO MODULE FOR 2022 MODEL YEAR

A new vehicle control unit (VECU5) has been developed to support feature growth in the coming years.

Read more
News article placeholder image

10/23/2019

Quick Reference: Vocational Parameters

Use this quick reference guide to open discussion with body builders and customers. The Volvo parameter offering is extensive and correctly programming the truck will make its operation safer and more efficient. Premium Tech Tool is required to adjust parameter logic.

Read more
body-builder-connectors

3/29/2019

Body Builder Connectors and Lighting Interface

Quick Reference Guide for Body Builder Connectors, Pinouts, Mating Connector Housing Assembly and Terminal Part Numbers. Also end of frame Lighting Connector information provided.

Read more

Frequently Asked Questions

What is the minimum RPM I should operate my PTO, so that my vehicle will perform Regeneration during PTO mode?
Regeneration in PTO Mode - when a vehicle is being operated in PTO mode and a diesel particulate filter (DPF) regeneration is commanded, the engine must be run at a speed above the minimum speeds listed in the tables in Body Builder Manual, Section 9, Table of Contents / Regeneration in PTO Mode. The minimum speed setting can be affected by ambient temperature and/or altitude.
Can the I-Shift change gears while transmission mounted PTO is active?
When a I-Shift mounted PTO is engaged, it is only possible to move the truck in one gear (1st, 2nd, or 3rd) – the transmission will not shift gears when the PTO is active. The transmission will not disengage the PTO once it is turned on and recognized by the VECU or TECU via the factory-installed PTO switch.
On Volvo I-Shift, with PTO engaged while in neutral, and then selecting Drive the PTO stops turning. Why?
Remember that the I-Shift is an automated manual transmission with a clutch. With the PTO engaged while in neutral, when selecting Drive, the clutch is released, then the transmission shifts into gear. When the driver takes his foot off the brake pedal and presses the throttle pedal the clutch will reengage and the PTO will start to turn again. The transmission will not shift gears and driver is limited to about 6 MPH.
More